When you think of plumbing, do you just see it as a hidden and mysterious network of pipes and pumps that makes your toilets and sinks work? If so, then you are very unlikely to have a go at mauntaining or repairing the system. Plumbing is not actually that complicated, and there are many things that you can do yourself to maintain and repair your system. Read on to find out how.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater's instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.
You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.
Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.
One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won't hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.
Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.
If you install a new water heater, and you start to have a leak from the pressure relief valve, you may need an expansion tank installed. The pressure increases when the functioning of the water heater is being performed properly. Therefore, with your new water heater, it may be necessary to have an expansion tank as well.
To better the efficiency of the water heater, see what size a tank your household requires. If you know how many people are in the home and how many appliances use hot water, you will have a good idea of what size tank is appropriate.
You have learned many ways to handle a wide variety of plumbing problems. Take the advice in this article to use as a guide. If you have any further questions, make sure to take the time to find the answers using the internet or a professional so that you know exactly what you are doing before you start. If you are in the Fair Oaks area in looking for plumbing service, call us at (916) 265-0891 or contact us online.
Fair Oaks Plumbers & Sewer
4826 Pennysylvania Ave.
Fair Oaks, CA 95628
(916) 265-0891
No comments:
Post a Comment