Monday, February 15, 2016

Learn How To Solve Plumbing Problems

If you are a homeowner and you have water issues, it can be a very daunting task. There aren't many ways to destroy a house faster than to leave a major plumbing problem unfixed. Fortunately, homeowners can take a lot of steps to prevent plumbing nightmares and to minimize the effects when they occur.



Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.



Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.



When starting a plumbing project that is due to loud noises in your pipes empty the pipes first. This can be an easy fix to an other wise wasted huge job. Just close the main water line and open the facets throughout the house. After the water has stopped flowing turn the water on from the main source and check to see if the noise is eliminated.



Ensure that the overflow holes in your sinks are not clogged. Sinks use overflow holes if they start to overfill, and this isn't usually a problem, but it can be. When you do periodic checks for any other problems or repairs that are needed, take the time to clear the holes that are there to protect you from overflow.



Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.



Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.



Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your "sweating" pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.



Knowing how to solve your own plumbing problems is important. You'll be able to respond to problems quickly, and avoid having to pay an expensive plumbing service to fix what you could have done yourself. Try applying these tips next time there's a problem, and see if you can fix your own plumbing. If you need plumbing service in the Sacramento area, call us at (916) 231-5681 or contact us online.



Park Mechanical Plumbing & Sewer

8324 Luzon Ave

Sacramento, CA 95828

(916) 231-5681

No comments:

Post a Comment